SHYAM INSTRUMENTS & CALIBRATION SERVICES
NABL Accredited Laboratory
Give us your valuable Feedback
For Specific Requirenments
Calibration Services
Calibration Capability as per ISO 17025 - 2017
|
Electro-Technical
|
||
|---|---|---|
|
Digital/Analogue Multimeter
|
Digital/Analogue Clamp meter
|
|
|
Leakage Current Meter
|
Power Analyser
|
|
|
Digital/Analogue Panel Meter
|
Micro Ohm Meter
|
|
|
Power Meter
|
Power Factor Meter
|
|
|
Energy Meter (kWH Meter)
|
Contact Resistance Meter
|
|
|
Winding Resistance Meter
|
Transformer Turn Ratio Meter
|
|
|
Digital/Analogue Earth Resistance Meter
|
Digital/Analogue Insulation Tester
|
|
|
ELCB, RCCB Tester
|
LCR Meter, Motor Checker
|
|
|
Relay Test Set Single Phase/Three Phase
|
AC/DC Power Supply Source
|
|
|
Decade Resistance/Capacitance/Resistance Box
|
Substation Test Set
|
|
|
AC / DC Voltage Source
|
AC / DC Current Source
|
|
|
High Voltage Test Set Up To 100 kV AC/DC
|
Hi Pot Tester Up To 100 kV AC/DC
|
|
|
Oil Test Kit Up To 100 kV AC/DC
|
Vidar Test Kit Up To 100 kV AC/DC
|
|
|
Oscilloscope
|
Holiday Detector
|
|
|
Zeep Meter, PH Meter
|
Multifunction Process Calibrator/Temperature Calibrator/ Loop Calibrator
|
|
|
Timer / Stop Watch / Counter
|
Time Interval Meter
|
|
|
Digital Sound Level Meter
|
Digital Tachometer Contact Type/ Non-Contact Type
|
|
|
Digital Lux Meter
|
Temperature Controller/ Indicator
|
|
|
Digital Solar Multimeter
|
RTD / TC Test Kit
|
|
|
Phase Sequence Indicator
|
Multi-Function Meter 1 Phase & 3 Phase
|
|
|
Thermal
|
||
|---|---|---|
|
Temperature Sensor (RTD PT100 Or Thermocouple) With Or Without Indicator -80 °C To 400 °C
|
Temperature Sensor (RTD PT100 Or Thermocouple) With Or Without Indicator 400 °C To 1200 °C
|
|
|
Temperature Recorder With Or Without Temperature Sensor/TC
|
Temperature Scanner With Or Without Temperature Sensor/TC
|
|
|
Temperature Data logger
|
Glass Thermometer
|
|
|
Thermo Hygrometer
|
Temperature & Humidity Meter
|
|
|
Digital Infrared Thermometer
|
Thermal Imaging Camera
|
|
|
Temperature Bath
|
Digital Moisture Meter
|
|
|
Welding Electrode Heating Oven
|
Mother Oven/Furnace
|
|
|
Autoclave (Calibration of indicator with Sensor)
|
Validation of autoclave / Oven
|
|
|
Refrigerator
|
Water Bath
|
|
|
Mechanical
|
||
|---|---|---|
|
Pressure Gauge -0.8 Bar To 7 Bar
|
Pressure Gauge 7 Bar To 700 Bar
|
|
Standard Equipment
Electro Technical
- Fluke 5502A, Multi Product Calibrator
- Fluke 8846A, 6½ Digit Precision Multimeter
- Micro/Milli Ohm meter Calibrator (Low Resistance Box) 2µΩ to 1.8Ω, 10Ω to 18 kΩ
- High Precision Decade Resistance Box, 0.01Ω to 100kΩ
- High Value Decade Mega ohm box 1MΩ to 10TΩ
- Decade Capacitance Box, 100 pF to 100 µF
- Decade Inductance Box, 100 µH to 10 H
- High Voltage Measure up to 100kV AC/DC by HV Divider
- High Voltage Measure up to 20 kV AC by Standard PT With 6½ Digit Precision Multimeter
- Digital Time interval Meter & Digital Timer, 0.01 Sec. to 24 Hr.
- AC High Current Measure by Standard CT, 10 Amp. To 1000 Amp.
- DC High Current Measure by Standard Shunt, 10 Amp. To 1000 Amp.
- Standard CT & PT for Turn Ratio Meter Calibration, 1 to 2000 Ratio
Thermal
- Low Temperature Bath Amb. to -80 °C to 25 °C and 4Wire PT 100 RTD Sensor with Precision Temperature Indicator
- Dry Well Temperature Bath Amb. to 400°C & and 4Wire PT 100 RTD Sensor with Precision Temperature Indicator
- Dry Well Temperature Bath 400°C to 1200°C & and S type Thermocouple with Precision Temperature Indicator
- Humidity & Temperature Chamber 10°C to 50°C, 20% RH to 85% RH and Rotronic HP32 Humidity & Temperature sensor with Indicator
- Black Body Source with Infrared Thermometer, 50 °C to 500 °C
- RTD PT100 (9 Sensors) With Temperature Scanner By comparison method
Mechanical
- Tachometer Calibrator, Contact Type 10 RPM to 8000 RPM,
- Tachometer Calibrator, Non – Contact Type 10 RPM to 100000 RPM,
- Sound Level Calibrator, 94 dB & 114 dB
- Fluke Make Pressure Gauge Calibration Setup -0.8 bar to 700 bar by Pneumatic Pump and Comparator Pump by comparison
Calibration Capability as per ISO 17025-2017:
Discipline : Electro-Technical, Source Mode
|
Parameter
|
Range
|
Std. Equipment
|
|---|---|---|
|
AC Voltage
|
1 mV to 1000 V
|
5502A, Fluke, Multi Product Calibrator
|
|
DC Voltage
|
DC Voltage 1 mV to 1000 V
|
5502A, Fluke, Multi Product Calibrator
|
|
AC Current
|
30 µA to 20 A
|
5502A, Fluke, Multi Product Calibrator
|
|
DC Current
|
10 µA to 20 A
|
5502A, Fluke, Multi Product Calibrator
|
|
AC Current
|
10 A to 1000 A
|
5502A, Fluke, Multi Product Calibrator with 50 Turns Current Coil
|
|
DC Current
|
10 A to 1000 A
|
5502A, Fluke, Multi Product Calibrator with 50 Turns Current Coil
|
|
Resistance
|
1 Ω to 1000 MΩ
|
5502A, Fluke, Multi Product Calibrator
|
|
Capacitance
|
220 pF to 100 µF
|
5502A, Fluke, Multi Product Calibrator
|
|
Frequency
|
10 Hz to 1 MHz
|
5502A, Fluke, Multi Product Calibrator
|
|
DC Power
|
400 mW to 12 kW
|
5502A, Fluke, Multi Product Calibrator
|
|
AC Power at 0.1 Lag to UPF to Lead PF
|
40 mW to 12 kW
|
5502A, Fluke, Multi Product Calibrator
|
|
Power Factor / Phase Angel 0.1 Lag to
|
UPF to 0.1 Lead PF
|
5502A, Fluke, Multi Product Calibrator
|
|
Temperature Simulation RTD PT 100
|
-200 °C to 800 °C
|
5502A, Fluke, Multi Product Calibrator
|
|
Temperature Simulation K, J, E, T, R, S, B, N type TC
|
-200 °C to 1800 °C as per type of Thermocouple
|
5502A, Fluke, Multi Product Calibrator
|
|
Low Resistance
|
10 µΩ to 1.8 Ω by
|
Micro/Milli Ohm meter Calibrator
|
|
Resistance
|
1 Ω to 100 kΩ
|
High Precision Decade Resistance box
|
|
High Resistance
|
1 MΩ to 10 TΩ
|
High Value Decade Mega ohm box
|
|
Capacitance
|
100 pF to 100 µF
|
Decade Capacitance Box
|
|
Inductance
|
100 µH to 10 H
|
Decade Inductance Box
|
|
Ratio Meter
|
1 to 2000 Ratio
|
Standard CT & PT
|
|
Oscilloscope
|
|
5502A, Fluke, Multi Product Calibrator
|
Discipline : Electro-Technical, Measure Mode
|
Parameter
|
Range
|
Std. Equipment
|
|---|---|---|
|
AC Voltage
|
1 mV to 1000 V
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
DC Voltage
|
1 mV to 1000 V
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
AC Current
|
30 µA to 20 A
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
DC Current
|
10 µA to 20 A
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
Resistance
|
1 Ω to 1000 MΩ
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
Capacitance
|
1 nF to 100 µF
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
Frequency
|
10 Hz to 1 MHz
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
Frequency
|
10 Hz to 1 MHz
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
Temperature Simulation RTD PT 100
|
-200 °C to 600 °C
|
8846A, Fluke, 6½ Digit Precision Multimeter
|
|
Temperature Simulation K, J, E, T, R, S, B, N type TC
|
-200 °C to 1800 °C as per type of Thermocoupl
|
5502A, Fluke, Multi Product Calibrator
|
|
Temperature Simulation RTD PT 100
|
-200 °C to 800 °C
|
5502A, Fluke, Multi Product Calibrator
|
|
Temperature Simulation K, J, E, T, R, S, B, N type TC
|
-200 °C to 1800 °C as per type of Thermocouple
|
5502A, Fluke, Multi Product Calibrator
|
|
AC High Voltage @ 50 Hz
|
Up to 30 kV
|
Standard PT With 6½ Digit Precision Multimeter
|
|
AC High Voltage @ 50 Hz
|
Up to 100 kV
|
High Precision Decade Resistance box
|
|
DC High Voltage
|
Up to 100 kV
|
by High Voltage Divider with kV Meter
|
|
Timer/Stopwatch/Counter/Time Interval Meter
|
0.01 Sec. to 3600 Sec.,
3600 Sec. to 24 Hour Time Interval Meter & Time Calibrator
|
Decade Capacitance Box
|
|
AC Current
|
0 A to 1000 A
|
Standard CT with 8846A, Fluke, 6½ Digit Precision Multimeter
|
|
DC Current
|
10 A to 1000 A
|
Standard Shunt with 8846A, Fluke, 6½ Digit Precision Multimeter
|
Discipline : Thermal
|
Parameter
|
Range
|
Std. Equipment
|
|---|---|---|
|
Temperature Sensor with or without Indicator
|
-80 °C to 25 °C
|
4Wire RTD PT 100 With Precision Temperature Indicator by Comparison Method
|
|
Temperature Sensor with or without Indicator
|
25 °C to 400 °C
|
4Wire RTD PT 100 With Precision Temperature Indicator by Comparison Method
|
|
Temperature Sensor or Thermocouple with or without Indicator
|
400 °C to 1200 °C
|
S Type TC With Precision Temperature Indicator by Comparison Method
|
|
Liquid in Glass Thermometer
|
-80 °C to 50 °C
|
4Wire RTD PT 100 With Precision Temperature Indicator Comparison Method
|
|
Humidity & Temperature Sensor, Thermo-Hygrometer, Data Logger
|
10°C to 50°C, 20% RH to 85% RH
|
Rotronic HP32 Humidity & Temperature sensor with Indicator by Comparison Method
|
|
Infrared Thermometer, Thermal Imager, Thermal Pyrometer
|
50 °C to 500 °C
|
Black Body Source with Infrared Thermometer by Comparison Method
|
|
Temperature Indicators With Sensors of Liquid Bath
|
-80 °C to 400 °C
|
4Wire RTD PT 100 RTD With Precision Temperature Indicator by Comparison Method (Single position)
|
|
Temperature Indicators With Sensors Of Dry Well Baths, Ovens, Furnace
|
400 °C to 1200 °C
|
S Type TC With Precision Temperature Indicator by Comparison Method
(Single position)
|
|
Hot Air Oven / Furnace / Temperature Chamber/ Autoclave / Climatic Chambers (Multi Position Calibration)
|
Up to 200 °C
|
Using RTD PT100 (9 Sensors) With Temperature Scanner By comparison method
|
Discipline : Mechanical
|
Parameter
|
Range
|
Std. Equipment
|
|---|---|---|
|
Tachometer (Non-Contact Type)
|
10 RPM to 10000 RPM
|
Tachometer Calibrator & Standard Tachometer by Comparison Method
|
|
Tachometer (Contact Type)
|
10 RPM to 5000 RPM
|
Tachometer Calibrator & Standard
Tachometer by Comparison Method
|
|
Sound Level Meter at 1 kHz
|
94 dB & 114 dB
|
Using Sound Level Calibrator by Direct Method
|
|
Pneumatic Pressure, Digital/Dial Pressure Gauges, Transmitter, Transducer
|
-0.8 bar to 35 bar
|
Digital Pressure Gauge &Pneumatic Pump by Comparison Method
(DKD R-6-1) |
|
Pneumatic Pressure, Digital/Dial Pressure Gauges, Transmitter, Transducer
|
0 bar to 700 bar
|
Digital Pressure Gauge & Comparator
Pump by Comparison Method
(DKD-R-6-1) |